Replacing the battery in a subaru key fob is a simple process that can be done at home with just a few basic tools. In this article, we will show you how to do it. The process is the same for most subaru key fob models. You can purchase a new battery in an electronics or automotive store; however, it’s probably more convenient to go with an online retailer like uhs-hardware where you can buy batteries for about $15.
How To Replace a Remote for a Subaru Outback Keyless Entry
The first step is to open your key fob. I recommend using a keychain style flat screwdriver to avoid damaging the case. Once you remove the four screws, separate the two halves of your fob carefully. Be sure not to lose any small parts inside.
The next step is to remove the battery from its holder by sliding it out with your finger or tweezers. You will need to use a CR2032 battery for this replacement.
Now, all you need is your new battery and the steps are simply reversed. Be sure to line up the tabs properly when installing.
Place your key fob back together and it is ready for action! It may take a few doors and trunk slams before the signal becomes strong again.
Do you have a Subaru key fob that needs a new battery?
Replacing the battery in your Subaru key fob is a simple process that can be done at home with just a few basic tools. In this article, we will show you how to do it. The process is the same for most Subaru key fob models.
You can purchase a new battery in an electronics or automotive store; however, it’s probably more convenient to go with an online retailer like uhs-hardware where you can buy batteries for about $15.
Follow our easy steps to replace the battery in your Subaru key fob today!
Subaru has made it easy for their drivers to replace the key fob battery. All you need is a coin- -Replacing the battery takes less than 5 minutes and can be done by anyone without any prior experience or tools. -The key fob replacement instructions are available on Subaru’s website in both English and Spanish.
